1000W Super Power LED Floodlights| LED outdoor Floodlights| LED High Bay Light

Home > Application

Application

Coking Plant Industry Soluation Light
COKING PLANT INDUSTRY LIGHTING SOLUTION узнать погоду here The coking plant is generally composed of a coal preparation plant, a coking plant, a recycling plant, a tar processing plant, a benzene processing plant, a desulfurization plant, and a waste water treatment plant. Coking plant basement, high temperature, average annual temperature of 20-25 °C, slight vibration, dust, but not strong, daily build sanitation, there will be dust flying phenomenon, to maintain lighting. Metallurgical industry lighting solutions must consider reducing the safety issues in the metallurgical industry due to lighting in all regions and each worker safe, improve the productivity, and reduce the probability of accidents. Delayed coking is the secondary processing of petroleum coke, gasoline, diesel oil, wax oil, and gas by thermal destruction of residual oil under high temperature conditions. The coking process is a comprehensive process of thermal decomposition and condensation. The device belongs to high temperature (up to a maximum temperature of 1000°C, medium temperature up to 500°C), high pressure (maximum pressure up to 3.8MPa), flammable and explosive devices. The raw materials used in the device are atmospheric and vacuum decompressed residual oils, the auto-ignition temperature is 230-240°C, and the operating temperature of the device is more than 300°C. Once the leakage is easy to occur, the dry gas produced and the boiling point and flash point of gasoline are produced. They are very low and can form explosive mixtures with air. Their explosion limits are 1.5% to 15% (V/V) and 1.4% to 7.6% (V/V), respectively. At the same time, because the autoignition point of diesel and wax oils of their products are all lower than the operating temperature of the device, fire is easily occurred and there is a great danger. Leakage is a common cause of flammable (explosive) mixtures. Leakage of flammable gases, flammable liquids, and liquids whose temperature exceeds the flash point will produce a flammable (explosive) mixture in the leaked area or on the leaked liquid surface. Many facilities of coking plants are equipped with discharge pipes, equipment for processing or storing flammable and flammable materials, or storage tanks. The gas (gas) bodies released by the discharge pipes are themselves flammable (explosive) mixtures, or they are released from the air. Mix into a combustible (explosive) mixture. Therefore, coke plant as a CLASS I hazardous locanti, all fire and explosion protection measures are to prevent the production of flammable (explosive) mixtures or prevent the generation and isolation of sufficient strength of the activation energy, in order to avoid the ignition of combustible mixture combustion, LED Explosion-proof led flood lights and LED Explosion proof high bay lights special for Class I Div 1, Div 2, Class II Div 1, Div 2 hazardous lighting, can meet your high-level explosion-proof requirements. [View Details]
Offshore Drilling Platform Light Solution
OFFSHORE DRILLING PLATFORMS LIGHTING SOLUTION узнать погоду here Offshore drilling platforms are important production bases for petroleum products and natural gas. The main component of natural gas is methane. People and equipment are transported by helicopters in these offshore market bases. The concentration of oil and gas generated during drilling is constantly changing. These locations must use CLASS I explosion-proof products. Similarly, in factories that use these oil and gas products as raw materials, for example, chemical plants that use pentane to further chemically react with ether groups, chemical fertilizer factories, and so on, all need to work under safe and non-hazardous conditions. These places must be absolutely flame retardant. Explosion-proof lamps and other explosion-proof switchgear equipment developed by CESP are dedicated to these CLASS I hazardous environments. [View Details]
Oil & Gas Station Lighting Solution
узнать погоду here The gas station is a highly standardized place. Because of the explosion hazard and toxicity of motor fuel, it is not easy to control the gas station in case of accident, and the gas station has many points, so the safe operation of the gas station greatly affects the people. The safety of life and property. In nowadays, the lamps commonly used in regulated gas stations are led explosion-proof light. The level of the luminaires should reach the basic explosion-proof level, and the EX explosion-proof mark can be clearly seen on the lamp housing. Lighting fixtures outside the explosion hazardours area of the refueling station can be of non-explosion-proof light. but luminaires in non-explosive hazardous areas under the awning, lighting fixtures with a degree of protection not less than IP44 should be used. Of course, different countries have different standards, and according to relevant standards, select explosion-proof lamps that require high requirements. In addition, the task of gas station lighting design is to first establish a customer's sense of security and trust to attract customers, and secondly, a happy consumer experience will ensure that customers come again. Good customer service begins when the customer enters the gas station, and comfort is the first element of pleasing the customer. The general illumination is greater than 100 lx. But, our design recommendation is higher than 300 lx. [View Details]