Explosion proof LED Low Bay Light - Zone 1 Zone 2 Hazardous Area Lighting

GB-02 explosion proof lights are made of alloy aluminum and tempered glass, shock resistance and anti-vibration performance. The fixtures have passed ATEX IECEx standards test, can be used for the Zone 1 Zone 2 hazardous area lighting.

In addition to the efficient and safe, emergency option and installation option for your project requirement.

Applications:

Wastewater treatment, oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor wall, and stanchion mounted general area lighting, and where flammable vapors, gases, ignitable dusts, fibers or flying are present.

Warning：

IECEx& ATEX :

• “WARNING – DO NOT OPEN WHEN ENERGIZED”；
• “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”；
• “WARNING – Potential Electrostatic Charging Hazard –Please wipe with a damp cloth when cleaning”;
• End user shall use a certified cable gland suitable type of protection for final installation purpose；
• External earth wire shall be connected when used and the cross-sectional area shall be more than 4mm² or 10AWG；
• Under rating conditions, the maximum temperature on the luminaire’s shell shall not be higher than 130℃ for T4. Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally. For CES-EX-GB-02-30、CES-EX-GB-02-40，The branch point is 57.3℃ and the cable entry point is 52.3℃