Explosion proof Fluorescent Light Replacement for Zone 1 Zone 21 Hazardous Areas

LN-02P is one explosion proof led linear fixture to replace the traditional explosion-proof fluorescent light and explosion-proof tri-proof light. High lumen, less power, save energy. High strength aluminium alloy enclosure, impact and vibration resistant. High light-transmission PC cover reduces direct visual contact with the light source. Special powder spraying treatment can for corrosive environments..

Destription:

The Explosion Proof Linear Fixture series features is a 90 minute emergency backup battery in 12W designed for hazardous environments where with explosive gas atmosphere or explosive dust atmosphere may be present.

This battery backup lighting fixtures made of the die-cast aluminum and the PC cover. Good heat, and 6J impact resistance.
Installation: pendant, ceiling, pole or more customized.

Adopt to the high light-efficacy LED source, up to 140lm/W, the CCT is 2700K, 3000K, 4000K, 5000K, 5700K, 6500K optional, no flicker, no glare.

The electrophoresis technology and the multiple coats of marine anti-corrosion paint, the all the mounting brackets and accessories are made of 316 stainless steel, UL1598A anti-corrosion standard can for marine location.

Warning :

• “CAUTION-USEFASTENER WITH YIELD STRESS ≥ 640 MPa”；
• “WARNING – DO NOT OPEN WHEN ENERGIZED”；
• “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”；
• “WARNING – ONLY USE CABLES SUITABLE FOR 85°C”；
• " WARNING - DETAILED TEMPERATURE CLASS - SEE INSTRUCTIONS”；
• “THE FLAMPROOF JOINTS ARE NOT INTENDED TO BE REPAIRED”;
• End user shall use certified cable gland or conduit with suitable type of protection for final installation purpose；
• External earthing wire shall be connected when used and the cross-sectional areashall be more than 4mm2 or 10AWG；
• Under rating condition, maximum temperature on the luminaire’s shell shall not be higher than 130℃for T4.Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally. The branch point is 83.6℃and cable entry point is 69.4℃